DRE Waveline Pro Touch-Screen Anesthesia Monitor

Performance

• Display: 15-inch color touch-screen
• Trace: 8 waveforms
• Trend Time: 1 – 72 hour
• Recorder: Built-in thermal array, 3 channels
• Record Width: 48 mm
• Recorder Paper: 50 mm
• Record Speed: 25 mm/s, 50 mm/s

ECG

• Input: 5-lead ECG cable and standard AAMI line for connection
• Lead Choice: I, II, III, aVR, aVF, aVL, V, V1-V6, TEST
• Gain Choice: x0.5, x1, x2, x4
• Frequency Characteristic: 0.05 ~ 35 Hz (+3dB)
• ECG Waveforms: 7 channels
• Sweep Speed: 12.5, 25, 50 and 100 mm/sec
• HR Display Range: 30 ~ 300 bpm
• Accuracy: ±1 bpm or ±1%, whichever is greater
• Alarm Limit Range Setting: Upper 100 ~ 200 bpm, Lower 30 ~ 100 bpm

RESP

• Measure Method: RA-LL impedance
• Range: 0 ~ 120 rpm
• Accuracy: ±3 rpm
• Alarm Limit Setting: Upper 6 ~ 120 rpm, Lower 3 ~ 120 rpm

NIBP

• Measuring Technology: Automatic oscillating measurement
• Cuff Inflating: <30 s (0 ~ 300 mmHg, standard adult cuff)
• Measuring Period (AVE): <40 s
• Mode: Manual, Auto
• Measuring Interval in AUTO Mode: 2 min ~ 4 hrs
• Pulse Rate Range: 30 ~ 250 bpm
• Measuring Range (Adult/Pediatric): SYS 40 ~ 250 mmHg, DIA 15 ~ 200 mmHg
• Measuring Range (Neonate): SYS 40 ~ 135 mmHg, DIA 15 ~ 100 mmHg
• Accuracy: Maximum Mean Error ±5 mmHg; Maximum Standard Deviation 8 mmHg

TEMP

• Range: 25 ~ 50 °C
• Accuracy: ±0.2°C (25.0 ~ 34.9°C); ±0.1°C (35.0 ~ 39.9°C); ±0.2°C (40.0 ~ 44.9°C); ±0.3°C (45.0 ~ 50.0°C)
• Display Resolution: 0.1°C
• Alarm Limit Setting: Upper 0 ~ 50°C, Lower 0 ~ 50°C
• Channel: 2 channels

SpO2 (Masimo SET)

• SpO2 Measuring Range: 1 ~ 100 %
• PR Measuring Range: 25 ~ 240 bpm
• SpO2 Accuracy (non-motion) Adult/Pediatric: 70–100%: ±2%
• SpO2 Accuracy (non-motion) Neonate: 70–100%: ±3%
• SpO2 Accuracy (motion) Adult/Pediatric: 70–100%: ±3%
• Low Perfusion Performance: >0.02% Pulse Amplitude and % Transmission >5
• PR Accuracy (non-motion): 25–240 bpm: ±3 bpm
• PR Accuracy (motion): 25–240 bpm: ±5 bpm

IBP

• Measurement Range: -50 ~ 300 mmHg
• Channel: 2 channels
• Pressure Transducer Sensitivity: 5 µV/V/mmHg
• Impedance Range: 300 ~ 3000 Ω
• Transducer Sites: ART, PA, CVP, RAP, LAP, ICP
• Unit: mmHg/kPa selectable
• Resolution: 1 mmHg
• Accuracy: ±1 mmHg or ±2%, whichever is greater
• Alarm Range: -10 ~ 300 mmHg

EtCO2 (Optional)

• CO2 Measurement Range: 0 ~ 99 mmHg
• Accuracy: ±2 mmHg (0 ~ 38 mmHg); 39–99 mmHg ±5% of reading +0.08% per 1 mmHg above 38 mmHg
• Sampling Rate: 50 ml/min
• Initialization Time: 30 seconds (typical)
• Respiration Rate: 0 ~ 150 breaths/min
• Mode: Adult, Neonate

Cardiac Output (Optional)

• Measurement Method: Thermodilution Method
• C.O. Measurement Range: 0.1 to 20 L/min
• Resolution/Accuracy: C.O. ±5% or ±0.1 L/min, whichever is greater
• Repeatability: C.O. ±2% or 0.1 L/min, whichever is greater
• TB, TI Resolution: 0.1

Anesthetic Agents (Optional)

• Method: Infrared absorption
• Gas Sorts: Halothane, Isoflurane, Enflurane, Sevoflurane, Desflurane, CO2, N2O, O2 (optional Automatic Agent ID)
• Measurement Range: Halothane/Isoflurane 0 – 8.5%; Enflurane/Sevoflurane 0 – 10%; Desflurane 0 – 20%; CO2 0 – 10%; N2O/O2 0 – 100%
• Bias/Accuracy: Halothane/Isoflurane/Enflurane/Sevoflurane/Desflurane: ±(0.15 Vol% + 15% rel.); CO2: ±(0.5 Vol% + 12% rel.); N2O: ±(2 Vol% + 8% rel.); O2: ±3 Vol%

Networking

• Wireless: Industry standard 802.11b/g
• Connectivity: Ethernet and RS-232 with open communication protocol
• Compliance: HL7 compliant

Power

• AC Power: 100 – 240 VAC, 50/60 Hz
• Battery: Built-in and rechargeable lithium ion
• Operating Time: 3+ hours

Environmental

• Operating Temperature: 5° – 40° C
• Storage Temperature: -20° – 65° C
• Humidity Operating: ≤ 80%
• Humidity Storage: ≤ 80%

Other

• Other Standard Features: OxyCRG, drug dose calculation, cascading ECG, on-screen NIBP trends (up to 250 readings), user-set defaults, arrhythmia detection, ST segment
• Condition: New
• Category: Patient Monitoring
• Medical Equipment: Anesthesia Monitors