The ADELA-WD 200 processes eight full DIN baskets in a single 200-liter cycle, cutting your instrument turnaround time while delivering validated 93°C.
The ADELA-WD 200 processes eight full DIN baskets in a single 200-liter cycle, cutting your instrument turnaround time while delivering validated 93°C thermal disinfection. Unlike smaller units that force multiple cycles for large surgical sets, this washer handles everything from microsurgical instruments to OR containers in one batch.
The 7-inch touchscreen tracks every parameter in real time and stores 200 cycle records for full traceability. Worth noting: the integrated dosage pumps eliminate manual chemical handling, while HEPA-filtered drying at 60°C means instruments come out ready for immediate packaging. Ethernet connectivity pushes cycle data directly to your CSSD management system.
The pass-through configuration supports clean-to-dirty workflow separation, and swivel castors let you reposition the unit without disconnecting utilities. The electro-polished AISI 316L chamber won’t pit or stain, even with aggressive detergents.
## Chamber
– Chamber Volume: 200 L
– Chamber Depth: 600 mm
– Chamber Height: 582 mm
– Chamber Width: 618 mm
– Chamber Material: 1.5 mm AISI 316L Stainless Steel
– Chamber Polishing: Electro-polishing
## Size
– Device Dimensions (D x H x W): 825 x 1860 x 855 mm
– Packing Dimensions (D x H x W): 1025 x 2060 x 1055 mm
## Construction
– Body Material: 2.5 mm AISI 304 Stainless Steel
– Panel Coating: 1.5 mm AISI 304 Stainless Steel
– Door: Tempered Glass
– Piping: Silicone Hose, 1.5 mm AISI 304 Stainless Steel
## Controls
– Control System: PLC
– Screen: 7″ Color TFT Touch LCD
– Operation Mode: Full automatic / buttons and touch screen
– Data Storage: 200 cycles
– Communication: RS232 Port / USB, Ethernet
– Printer: Thermal printer with 40 characters/lines (Optional)
– Warning System: Audiovisual and written messages
## Performance
– Disinfection Temperature: 93 degrees C
– Drying Temperature: 60 degrees C
– Temperature Operation Range: 15 – 110 degrees C
– Water Consumption: Approximately 120 L/cycle
– Water Heat Resistance: 9 kW
– Drying Resistance: 5.7 kW
– Drying Fan Flow: 150 m3/h
– Circulation Pump Power: 1.4 kW
– Circulation Pump Flow: 600 RPM
## Capacity
– Basket Layers: 4
– DIN Baskets: 8
– Door Options: Single door or double door (pass-through)
– Door Type: Automatic sliding or manual
## Power
– Electrical Connection: 3N+1, 50 Hz, 380 V
– Installation Power: Approximately 20 kW, 3 Phase, 380 VAC +/-10
– Water Drain Pipe Diameter: 25 mm
## Safety
– HEPA Filter: H14, Particle Retention 99.999%
– Protections: Current leak, short circuit, safety valve, password, emergency stop
– Temperature Sensors: 3x PT100 (DIN A Class) – Cabin (2), Water (1)
– Pressure Sensors: 2 sensors – Cabin (1), Air (1)
## Standards
– Medical Device Directive: MDD 93/42/EEC – 2007/47/EC
– Medical Device Class: Class IIb (Annex IX)
– Low-voltage Directive: 2014/35/EU, EN 60601-1
– EMC Directive: 2014/30/EU, EN 60601-1-2
– Washing and Disinfection: EN 15883-1 Series Standards
– Quality Management: ISO 9001, ISO 13485, ISO 14001
## Condition
– Status: Refurbished
## Intended Use
– Settings: Hospital CSSD, outpatient clinics, rehabilitation centers, and laboratories for reprocessing surgical instruments and reusable medical devices
