The AMSCO 7052HP processes everything from delicate anesthesia components to heavy orthopedic instruments in the same compact footprint, switching between.
The AMSCO 7052HP processes everything from delicate anesthesia components to heavy orthopedic instruments in the same compact footprint, switching between gentle 341 L/min flow for plastics and aggressive 625 L/min wash action for bone instruments. Its dual-speed pump system means you won’t need separate washers for different instrument types.
The 8.4-inch touchscreen loads eight factory cycles plus 20 custom programs, so your staff can optimize processing for specific departments. Worth noting: the Dual Wash phase combines enzyme and detergent in one fill, cutting cycle times while the thermal rinse hits 90°C for validated intermediate-level disinfection. ConnectAssure networking exports cycle data directly to your compliance systems.
The patented rotary spray arms remove tool-free for daily cleaning, and the four-sided HEPA-filtered drying system self-adjusts based on your loaded rack. Power sliding doors work in single-door or pass-through configuration with door interlock to prevent cross-contamination between dirty and clean sides.
## Size
– Operating Dimensions (W x H x L): 1067 x 2051 x 813 mm (42 x 80-3/4 x 32″)
– Chamber Dimensions (W x H x L): 673 x 667 x 648 mm (26-1/2 x 26-1/4 x 25-1/2″)
– Loading Height: 787 mm (31″) above finished floor
– Minimum Ceiling Height (door removal): 2388 mm (94″)
## Weight
– Shipping Weight: Approximately 635 kg (1400 lbs)
– Operating Weight: 700 kg (1543 lbs)
## Construction
– Chamber Material: 16-gauge 316L stainless steel (No. 4 finish), argon-welded and polished
– Chamber Design: Sanitary-type with sloped horizontal surfaces for complete drainability
– Sump: 316L stainless steel, 27 L (7.2 gal) capacity with removable stainless steel filter
– Exterior: Single-walled, insulated construction
– Spray Arms: Patented rotary assemblies, top and bottom, each 620 mm (24-3/8″) long, tool-free removal
## Controls
– Touch Screen: 8.4″ color, mounted at eye level on both sides of unit
– Factory Cycles: 8 (Instruments, Orthopedic Instruments, Utensils, Plastic Goods, Rigid M.I.S., Anesthesia/Respiratory, Gentle, Decontamination)
– Custom Cycles: Up to 20
– Warning System: Audible (adjustable volume) and visual with LED status indicators
– Data Export: USB port and optional ConnectAssure Ethernet
– Security: Lock-out feature requiring access code
## Performance
– Wash Temperature: Up to 85 degrees C (185 degrees F)
– Thermal Rinse Temperature: Up to 90 degrees C (194 degrees F)
– Pump (High Speed): 625 L/min at 60 m head (equivalent 14 HP)
– Pump (Low Speed): 341 L/min at 14 m head (equivalent 3.5 HP)
– Drying Blower: 2.2 kW (3 HP)
– Drying Heaters: 11.4 kW (three electric heaters)
– HEPA-Filtered Fresh Air: Yes
– Acu-Drying: Self-adjusting drying time based on load
– Noise Level: 60.6 dB
## Doors
– Type: Power vertical sliding, double-pane tempered glass
– Configuration: Single-door or double-door (pass-through)
– Safety: Obstruction sensor, safety lockout, door interlock
– 180-Degree Reverse Installable: Yes
## Chemical Delivery
– Injection Pumps: Peristaltic (enzyme, detergent, lubricant)
– Dosage Range: 0.2 to 16 mL/L (1/40 to 2 oz/gal)
– Optimized For: Prolystica Ultra Concentrate HP chemicals
– Remote Delivery: Low-level sensors, 30 m (100 ft) extension tubes
## Power
– Configurations: Steam-heated or electric-heated
– Voltage Options: 200-208 V 50/60 Hz (steam), 380-400 V 60 Hz, 380-415 V 50 Hz, 460-480 V 60 Hz
## Installation
– Options: Freestanding or recessed, flush-to-wall or offset
– Barrier Wall Flanges: Included for one wall (clean side); optional second wall kit
– Seismic: Conforms to seismic building code; tie-down kit available
– Minimum Clearance Above Unit: 356 mm (14″)
## Standards
– Safety: IEC 61010-1:2010+A1:2016, UL 61010-1:2012, CSA C22.2 No. 61010-1-12
– Particular: IEC 61010-2-040:2020, UL 61010-2-040:2021
– EMC: IEC 61326-1:2020, FCC Part 15 Class A
– Performance: ISO 15883-1:2006/A2014, ISO 15883-2:2006, ANSI/AAMI ST15883
– CE: Medical Device Regulation (EU) 2017/745 (MDR)
– Software: IEC 62304:2006/Amd 1:2015
## Condition
– Status: Refurbished
## Intended Use
– Settings: Hospital CSSD, sterile processing departments, and healthcare facilities for cleaning and intermediate-level disinfection of reusable surgical instruments, utensils, and equipment
