DRE MVP Portable Pneumatic Ventilator, Blender & Humidifier Bundle - $3,000
DRE MVP Portable Pneumatic Ventilator, Blender & Humidifier Bundle - $3,000
0 Artículo está en su carrito Ver carrito ahora
Términos y Condiciones del Listado
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
The DRE MVP portable ventilator is for emergency ventilation of patients with allowance for spontaneous breathing, and is available through DRE. Contact an DRE representative today for more information.
Features
- Pneumatically driven
- Time-cycled
- Pre-set flow rate
- Time controlled
- Time and Flow
- Internal diaphragm allows for patient spontaneous breathing
Components
DRE MVP Ventilator
Provides ventilation with the benefit of allowing spontaneous breathing
- Pneumatically driven
- Provides invasive and non-invasive ventilation
- Pre-set flow rate
- Volumes derived from Time & Flow
- Includes reusable PEEP valve, patient circuit, and hose
DRE PH300 Humidifier
Delivers warm and humidified air and oxygen to patients.
- Designed for use with all ventilators
- Adjustable temperature control
- Please specify 110 or 220 volt
DRE High-Low Flow Oxygen Blender
Mixes medical grade compressed air and oxygen to provide a pressurized gas source ranging from 21 to 100 percent oxygen.
Specifications
General Conditions
- Supply Pressure:
- Specified connection 4 bar medical air or Oxygen
- Working Range 3.5 to 8 BarG specified range which is the typical pressure delivered by 4 bar and 7 bar pipelines
- 2.8 to 10 BarG shall cause no safety hazard in single faulty condition
- Supply Quality: Clean Dry medical grade Air/Oxygen
- Gas Supply Temperature : 10°C to 40°C
- Filtration Required within Ventilator: 40 Micron or better
- Environmental Temperature storage and transport : -5°C to 50°C
- Transport Temperature : -18 °C to 60°C
- Environmental Temperature operating : 10°C to 40°C
Flow Control
- Flow Range: 0.1 to 1 Litre per second, +/-10% of set value
- Adjustment Range: Rotary Control 300° +/- 5°
- Graduation 0.25, 0.25, 0.75, 1.0; control will be non-linear
On Timer
- Timing Range : 0.25 to 2.5 seconds, +/- 10% of set value
- Adjustment Range: Rotary control 300° +/- 5°
- Graduation 0.25, 0.5, 1.0, 1.5, 2.0, 2.5; control will be non-linear
Input Fittings
- Input fitting to Ventilator will be a BSP threaded port.
System On/Off Control
- Type of Operator : 1⁄4 Twist bi-stable control knob with on/off indicator symbols
System Pressure Regulator
- This is supplied pre-set and shall NOT be user adjustable without removing the cover of the unit using tools.
- This is a safety feature to prevent excessive pressure in a single failure mode.
Airway Manometer
- Respiratory manometer with a range of -20 to 100 cmH2O
- Major graduations at increments of 10 cmH2O stating the value
- Minor graduations at increments of 2 cmH2O without numbers
Materials
- All materials will be compatible with air and oxygen.
- No animal tissues or derivatives thereof are to be used in the device or its manufacturing process.
Patient Valve
- Connection to breathing circuit connections 22mm with 15mm internal female taper.
- Integral pre-set pressure limiting safety valve 60 cmH2O ± 2.5 cmH2O.
Usability
- The four rotary controls will include:
- On/Off
- Inspiratory Flow
- Inspiratory Time
- Expiratory Time
- The controls will enable a constant flow during the inspiratory phase and infinite variability of I:E settings within the range of the controls.
